Electric and manual roller shutter specification

Able security roller shutter, Ideal for shops, warehouses, offices and garages.
   
Shutter Screen (A) Height in meters Shutter Box Size (square) (B)
From To mm
1m 2m 205mm
2m 3m 300mm
3m 4m 355mm
4m 5m+ 380mm
Note: maximum height & width of manual shutters 3m x 3m before they need to be electric.
Electric roller shutter – Specification

Shutter Screen

75mm steel rolled sections of traditional pattern, galvanised and fitted with steel end-lock to insure the screen does not move from side to side. Available from 1m to 5M+ any width.

Electric Motor

100mm steel tube section fitted with 240volt single phase motor, using a maximum 3 amp per run. Motor comes complete with internal limit switch adjustments in up and down mode set by Able engineers on installation.
Brackets and guides Fabricated in 3mm rolled sections of steel, U-Channel/Guides available in 40/50/75/100mm deep, 25mm wide, bracket end plates (boxes) available in 205/300/355/380mm square.
Coil covers 20 gauge pressed galvanised steel sections
Colours Any BS or RAL numbers required at an additional cost

Key Switch Lock

Rocker Switch

Remote Control

Operation
Electric security key switch inside and out, rocker switch inside, but if required outside the switch must be housed in a galvanised lockable steel box or optionally switch can be operated with a remote control unit.
Guarantee All Able Shutter Services Limited products carry a standard 12 month warranty on parts and labor.
Click here to request a quote
Click here to view security shutters
Manual roller shutter – Specification

Shutter Screen

75mm steel rolled sections of traditional pattern, galvanised and fitted with steel end-lock to insure the screen does not move from side to side.
Manual operation push up/push down 100mm steel tube section fitted with internal helical spring, balanced on installation by Able engineers for ease of operation.
Brackets and guides Fabricated in 3mm rolled sections of steel, U-Channel/Guides available in 40/50/75/100mm deep, 25mm wide, bracket end plates (boxes) available in 205/300/355/380mm square.
Coil covers 20 gauge pressed galvanised steel sections.
Colours Any BS or RAL numbers required at an additional cost.
Locks

Bullet Lock

Shutter Lock

Bullet locks, fitted as standard, solid steel body welded to face of guide. Locking pin is made of hardened steel for excellent security, locks can be keyed alike, each lock is supplied with two keys, we advise that two locks are supplied for each individual shutter. Optional Shutter screen lock can be supplied if required.
Guarantee  All Able Shutter Services Limited products carry a standard 12 month warranty on parts and labor.
Click here to request a quote
Click here to view security shutters